Safety Instructions - Zanussi ZWD 71663 NW User Manual

Table of Contents

Advertisement

Fabric softeners, or similar products, should only be used as
specified by the product manufacturer's instructions.
Remove all objects from items that could be a source of fire
ignition such as lighters or matches.
Never stop the washer dryer before the end of the drying cycle
unless all items are quickly removed and separated so that
residual heat can dissipate.
The final part of the washer dryer cycle takes place without heat
(cool down cycle) to ensure that items reach a temperature that
will not cause damage to them.
Do not use high pressure water sprays and/or steam to clean
the appliance.
Clean the appliance with a moist cloth. Use only neutral,
detergents. Do not use abrasive products, abrasive cleaning
pads, solvents or metal objects.
Before any maintenance operation, deactivate the appliance
and disconnect the mains plug from the socket.

SAFETY INSTRUCTIONS

INSTALLATION
Follow the installation instruction supplied with
the appliance.
Do not install or use the appliance where the
temperature can be less than 0°C or where it is
exposed to the weather.
Always keep the appliance vertical when being
moved.
Make sure that there is air circulation between
the appliance and the floor.
Remove all the packaging and the transit bolts.
The floor area where the appliance is to be
installed must be flat, stable, heat resistant and
clean.
Keep the transit bolts in a safe place. If the
appliance is to be moved in future they must be
reattached to lock the drum to prevent internal
damage.
Always take care when moving the appliance as
it is heavy. Always use safety gloves and
enclosed footwear.
Do not install or use a damaged appliance.
Do not install the appliance where the appliance
door cannot be fully opened.
Adjust the feet to have the necessary space
between the appliance and the flooring.
4
When the appliance is in its permanent position,
check that it is fully level with the aid of a spirit
level. If it is not, adjust the feet accordingly.
ELECTRICAL CONNECTION
WARNING! Risk of fire and electrical
shock.
The appliance must be earthed.
Always use a correctly installed shockproof
socket.
Do not use multi-plug adapters and extension
cables.
Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
Do not touch the mains cable or the mains plug
with wet hands.
UK and Ireland only. This appliance is fitted with
a 13 A mains plug. If it is necessary to change
the mains plug fuse, use only a 13 A ASTA (BS
1362) fuse.
This appliance complies with the E.E.C.
Directives.
WATER CONNECTION
Do not cause damage to the water hoses.

Advertisement

Table of Contents
loading

Table of Contents