Table of Contents
Advertisement
Fabric softeners, or similar products, should only be used as
•
specified by the product manufacturer's instructions.
Remove all objects from items that could be a source of fire
•
ignition such as lighters or matches.
Never stop the washer dryer before the end of the drying cycle
•
unless all items are quickly removed and separated so that
residual heat can dissipate.
The final part of the washer dryer cycle takes place without heat
•
(cool down cycle) to ensure that items reach a temperature that
will not cause damage to them.
Do not use high pressure water sprays and/or steam to clean
•
the appliance.
Clean the appliance with a moist cloth. Use only neutral
•
detergents. Do not use abrasive products, abrasive cleaning
pads, solvents or metal objects.
Before any maintenance operation, deactivate the appliance
•
and disconnect the mains plug from the socket.
SAFETY INSTRUCTIONS
INSTALLATION
•
Follow the installation instruction supplied with
the appliance.
•
Do not install or use the appliance where the
temperature can be less than 0°C or where it is
exposed to the weather.
•
Always keep the appliance vertical when being
moved.
•
Make sure that there is air circulation between
the appliance and the floor.
•
Remove all the packaging and the transit bolts.
•
The floor area where the appliance is to be
installed must be flat, stable, heat resistant and
clean.
•
Keep the transit bolts in a safe place. If the
appliance is to be moved in future they must be
reattached to lock the drum to prevent internal
damage.
•
Always take care when moving the appliance as
it is heavy. Always use safety gloves and
enclosed footwear.
•
Do not install or use a damaged appliance.
•
Do not install the appliance where the appliance
door cannot be fully opened.
•
Adjust the feet to have the necessary space
between the appliance and the flooring.
4
•
When the appliance is in its permanent position,
check that it is fully level with the aid of a spirit
level. If it is not, adjust the feet accordingly.
ELECTRICAL CONNECTION
WARNING! Risk of fire and electrical
shock.
•
The appliance must be earthed.
•
Always use a correctly installed shockproof
socket.
•
Do not use multi-plug adapters and extension
cables.
•
Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
•
Do not touch the mains cable or the mains plug
with wet hands.
•
This appliance complies with the E.E.C.
Directives.
WATER CONNECTION
•
Do not cause damage to the water hoses.
•
Before connection to new pipes, pipes not used
for a long time, where repair work has been
carried out or new devices fitted (water meters,
etc.), let the water flow until it is clean and clear.
Advertisement
Table of Contents
