Advertisement
Instructions for door reversal
The door of this washing machine is pre-
arranged for door reversal.
To carry out this operation, proceed as
follows:
a) Bend and disengage the end of the
closing catch from the door (1 figure 10),
then rotate it 90° to remove it from its
seating;
b) Using a screwdriver, rotate the plastic
cap (2 figure 10) 90° and remove it;
c) Fit the cap (2 figure 11) in the hole
left free by the closing catch and rotate
it 90° so as to lock it in position;
d) Fit the closing catch and rotate 90°
(1 figure 11) in the hole left free by the
cap, making sure that the engaging tooth
is facing towards the right side;
e) Remove the door by unscrewing the
two screws fastening the bottom hinge
(3 figure 10).
Keep hinge for possible future use if it is
required to return the door to original
opening position.
28
Advertisement
