Advertisement
Product Name:
SKU #:
Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest
standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged
parts. If any parts are missing or damaged, do not attempt to assemble or use the product.
CARTON CONTENTS:
Description
Fountain Top
Fountain Base
Fountain Pot
Pump
Compatible Pumps for this fountain:
Pump Model No.
JR350
JB333
YH300-70
Tools required for assembly: No tools required for assembly.
Assembly Instructions:
1. Unpack the contents of the box and check to make sure that all items are accounted for and in good
condition.
2. Select a flat, level surface for the assembly and final location of your fountain.
3. Place the pump in the reservoir base of the fountain, and lead the cord out of the back of the fountain.
Insert the water supply tube located in the base of the fountain top into the pump outlet. Lower the
fountain top into place.
4. Add clean water to the fountain. The water level should be approximately 30mm lower than the edge of the
basin.
5. Connect the power cable to outlet. If installed properly, water flow in the fountain will begin shortly.
6. Please do not use the electrical plug in wet weather conditions. Please note: On first use, there may be air in
the pump. It may take several minutes until all the air escapes.
7. To eliminate the possibility of water damage around your fountain, check for leaks and excessive splashing
after the initial setup of your fountain. It is highly recommended that this fountain be placed in an area
where it cannot be damaged.
8. Do not leave your fountain running for extended periods of time when no one is present to observe the
Metal Pitcher and Planter Outdoor Fountain
WHF1027
Quantity
1
1
1
1
Contact: cs@winsomehouse.com
Instruction Manual
Please save this manual for future reference.
Advertisement
Table of Contents
Related Manuals for LuxenHome WHF1027
Summary of Contents for LuxenHome WHF1027
- Page 1 Please save this manual for future reference. Product Name: Metal Pitcher and Planter Outdoor Fountain SKU #: WHF1027 Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest standards of safety and quality. PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
- Page 2 Product Name: Metal Pitcher and Planter Outdoor Fountain SKU #: WHF1027 performance. 9. Check the area around your fountain on a regular basis to ensure that there is no leakage. 10. Please refresh the fountain with water each week to ensure it in good condition.
- Page 3 Instruction Manual Please save this manual for future reference. Product Name: Metal Pitcher and Planter Outdoor Fountain SKU #: WHF1027 Pump Instructions: Special Warnings and Cautions: CAUTION: • The pump has been evaluated for use with water only. Risk of electric shock. Do not remove cord and strain relief. Do not connect conduit to pump.
- Page 4 Product Name: Metal Pitcher and Planter Outdoor Fountain SKU #: WHF1027 WARNINGS: 1. To reduce the risk of electric shock, connect only to a properly grounded, grounding type receptacle. 2. To reduce the risk of electric shock, use only on portable self-contained fountains no larger than 5 feet in any dimension.
- Page 5 Please save this manual for future reference. Product Name: Metal Pitcher and Planter Outdoor Fountain SKU #: WHF1027 CARE & MAINTENANCE: 1. Keep the water clean – clean water will prolong the useful life of your pump. 2. Use a pre-filter on your pump if available.
Need help?
Do you have a question about the WHF1027 and is the answer not in the manual?
Questions and answers