Bestway PLATINUM SWIM VISTA 1425469 Owner's Manual page 3

Put 2.5 cm (1 in) to 5 cm (2 in) water in the pool to cover the floor. Once pool floor is slightly covered, gently smooth out all wrinkles.
Start in the center of the pool and work your way clockwise to the outside.
Ensure that the PVC braces at the bottom of the legs are pulled tight. As the pool fills with water, continuously check to make sure
they are fully extended.
Do not assemble on soft lawn. If you must assemble the pool on a soft surface, timber boards (not included) must be placed under
the feet of the vertical supports to spread the load.
WARNING
smooth out the bottom
3