Pioneer VSX-95 Operating Instructions Manual page 50

TROUBLESHOOTING
TV source cannot be seen when | © TV antenna is not connected to VCR, or ® Consult the VCR's operating instructions, and
the VCR's TV tuner is used. connections are faulty. connect antenna correctly.
¢ You are attempting to watch a TV source using ® Disconnect the copy system connection.
a VCR with copy system connections.
In general, when copy system connections are
made, the VCR's TV tuner function ceases to
operate. For details, consult the operating
instructions for your VCR.
© Look again closely at the section VIDEO SYSTEM
CONNECTIONS on page 9, 10 and 12, and
connect correctly.
© Refer to the explanation of VIDEO RECORDING
on page 31.
¢ Video tape copy connections have not been
made.
Video tape copies cannot be
made with the VCR.
¢ INPUT SELECTOR and REC SELECTOR settings
are incorrect.
¢ Batteries are dead or no batteries in remote © insert new batteries.
control unit.
¢ Poor angle or too great a distance from the
remote sensor window.
¢ There is an obstacle between you and the
remote sensor window.
¢ A fluorescent light is shining on the remote
sensor window.
Remote control does not work.
¢ Use within seven meters and within a 30 degree
angle of the remote sensor window.
¢ Change your position or move the obstacle.
* Move so fluorescent light does not shine directly
on amplifier front panel remote sensor window.
© Switch surround OFF.
® Switch the REC SELECTOR OFF.
Sound in MULT! ROOM &
SOURCE Sub room is different.
¢ Main room is in the surround mode.
« A component has been selected with the
REC SELECTOR.
Abnormal functioning of this unit may be caused by lightning, static
electricity, or other external interference. To restore normal operation,
turn the power off and then on again, or unplug the AC power cord
and then plug it in again.
50
<ARB1333>