Automatic Recording - Kenwood TM-241A Instruction Manual

5-9-5
Ze
Play Back
Press the F key for longer than 1 second, then press
the DR/DT key while the F indicator is flashing to
enter the DRS setting mode.
The DRS indicator should turn on in the display.
Select the phrase number of the phrase you wish to
replay.
. Press the CALL key to play back the message. If you
wish transmit the message at the same time you
should press the PTT key before pressing the CALL
key. The elapsed time indicator will begin counting
the elapsed time.
3. Playback will stop when the time indicator displays
"OO". You can manually stop the play back by
pressing any front panel key.
5-9-6 Automatic Recording
1.
Select the desired operating frequency. Adjust the
SQL control to the threshold point. Automatic
recording is possible in the VFO mode, Memory
Channel mode, or Call Channel mode.
. Press the F key for longer than 1 second, then press
the DR/DT key while the F indicator is flashing to
enter the DRS setting mode.
Select the desired tone quality, the number of
recording phrases, and the beginning phrase
number.
. Press the F key for longer than 1 second, then press
the DR/DT key while the F indicator is flashing to en-
ter the DTMF control mode. The DRS indicator will
flash.
. Press the TONE/T.ALT key. The T.ALT indicator will
light and the recording wait mode (automatic re-
cording mode) will be entered.
@ SEGRSE ASOLS) O
37