Drs (Digital Recording System) Operation; Before Recording - Kenwood TM-241A Instruction Manual

5-9 DRS (Digital Recording System)
OPERATION
The optional DRU-1 (Digital Recording Unit) permits
you to manually or automatically record up to a maxi-
mum of 8 different voice messages for later playback.
The automatic recording function works in conjunction
with the T.ALT function.
This function can be used with the DTSS or paging
mode.
Press the F key for longer than 1 second, then press the
DR/DT key while the F indicator is flashing. This opera-
tion will change the modes as follows:
1
| Normal Mode -» DRS selection ——» DTMF control
| \ mode mode
@ Normal Mode
No DRS functions active.
@ DRS selection mode
Recording and playback
Selectable tone quality level
phrases
DRS indicator lights in the display
and or number of
34
@ DTMF contro! mode
1. Automatic Recording
The DRS indicator will flash.
2. The DRS function can be remotely controlled by an
external DTMF signal. The DRS indicator goes on
continuously.
5-9-1 Before Recording
The recording conditions are preset at the factory for
the following settings:
Tone Quality Level 1
Maximum recording phrase 8
Current Recording Phrase number 1 st.
0: Recording and playback OK. 1: Recording LOCK.
2: Recording and playback LOCK.
"Elapsed time | MAX. Number |. Phrase
<= | of phrases _ | , Number
oo
DRS 47 ©
i
i {
Tone quality
level