Table of Contents
Advertisement
Install
5. Set dial mode switch
This product comes set in tone dialing (TT) mode. Make
sure you choose the correct dialing method (TT or DP);
touch tone dialing will not work if you have dial pulse
service.
6. Check for dial tone
Lift the handset and listen for dial tone.
When there is an incoming call, the visual
ringer indicator light on the handset
flashes.
If you cannot hear a dial tone, refer to the
Troubleshooting section (Page 15) and
try to correct the problem.
To disconnect the telephone, squeeze the
clip on the modular plug and pull it out of
the jack.
5
Advertisement
Table of Contents
