Features; Package Contents - Hall Technologies FXT-460 User Manual

The audio that is embedded in the extended HDMI to the remote Receiver can be selected by the user
to be one of the following:
• Pass-through from HDMI input (same audio content as the HDMI input)
• External analog audio from the 3.5mm audio input connector
• External digital SPDIF audio from the Optical TOSLINK input connector
EDID management allows users to control the video and audio parts of the EDID independently. The
EDID presented to the source connected to the HDMI input can pass from the downstream device or
emulated from internal memory. The device can also "Learn" the EDID connected to its HDMI output.
The product has a video bandwidth of 18 Gbps and supports input resolutions of up to 4K @ 60 Hz
4:4:4 with HDR. It supports HDCP 2.2 as well as HDCP 1.4. All resolutions up to and including 4K @ 30Hz
with 4:4:4 or 4K @ 60 Hz with 4:2:0 are extended with no compression.
The device has the ability to generate a blank HDMI output signal with audio embedded even if there is
no HDMI input; often referred to as "HDMI Audio Bridging". This is a convenient means to distribute
audio only signals over an HDMI network.

FEATURES

• 4Kx2K@60Hz4:4:4/18.2Gbps/HDCP2.2
• Extends up to 33,000 ft (10 Km) over single mode or 1000 ft (300 M) Multi-Mode
• Bi-Directional RS-232 and EDID Management
• Can pass original HDMI audio or embed/substitute audio from external inputs.
• "HDMI Audio Bridging"
• HDMI Loop Output on Sender
• De-embedded HDMI audio available at both ends (Sender and Receiver)
• EDID Emulation with LEARN function.

Package Contents

FXT-460-S & FXT-460-R
 1x Model FXT-460-S
 1x 3 position terminal block for RS-232
 1x Power Supply
 4x Power universal adapter plugs
 1x Web documentation card
Hall Technologies August 9, 2023 Page 5 of 13