Daikin FTHF50VVMV Operation Manual page 12

OPERATION
AUTO · COOL · DRY · HEAT · FAN ONLY
Operation
„ To change the temperature setting
NOTE
Notes on AUTO operation
• In AUTO operation, the system selects an appropriate operation mode (COOL or HEAT) based on
the indoor temperature, then starts the operation.
• The system automatically reselects setting at a regular interval to bring the indoor temperature to
user-setting level.
Note on COOL operation
• This air conditioner cools the room by releasing the heat in the room outside.
Therefore, the cooling performance of the air conditioner may be degraded if the outdoor
temperature is high.
Note on DRY operation
• Eliminates humidity while maintaining the indoor temperature as much as possible.
It automatically controls temperature and airflow rate, so manual adjustment of these functions is
unavailable.
Notes on HEAT operation
• Since this air conditioner heats the room by taking heat from outdoor air to indoors, the heating
capacity becomes smaller in lower outdoor temperatures. If the heating effect is insufficient,
it is recommended to use another heating appliance in combination with the air conditioner.
• The heat pump system heats the room by circulating hot air around all parts of the room.
After the start of HEAT operation, it takes some time before the room gets warmer.
• In HEAT operation, frost may occur on the outdoor unit and lower the heating capacity.
In that case, the system switches into defrosting operation to take away the frost.
Note on FAN ONLY operation
• This mode is valid for fan only.
10
3. Press .
• The displayed items on the LCD will change whenever either one of
the buttons is pressed.
COOL operation HEAT operation AUTO operation DRY or FAN operation
16.0~32.0°C
Press to raise the temperature and press
lower the temperature.
Each pressing of the button changes the
temperature by 0.5°C.
10.0~30.0°C 16.0~30.0°C
to
The temperature
setting is not available.