Available Accessories; Troubleshooting - Shark Navigator Lift-Away ZU503AMZ Owner's Manual

AVAILABLE ACCESSORIES

Pet Crevice Tool
A
This versatile, slender 8" tool removes pet
hair from hard-to-reach spaces like corners,
ceilings, and between couch cushions.
Pet Multi-Tool
B
A single convertible tool for cleaning tough pet
messes two ways: use the stiff bristle brush to
clean stuck-on debris, or take off the bristles to
reveal an upholstery tool perfect for removing
stubborn pet hair and large piles of debris.
Duster Crevice Tool
C
Two cleaning tools in one. The crevice tool
gives you extended reach to clean in tight
spaces, while the soft brush is ideal for dusting
delicate surfaces.
Upholstery Tool
D
Picks up pet hair, dust, and large debris from
mattresses, couches, curtains, and other delicate
upholstered fabrics.
Under-Appliance Wand
E
Clean under and behind hard-to-move
appliances and furniture with this adjustable
36" tool. Flip the extension piece over to clean
the underside of appliances.
Self-Cleaning Pet Power Brush
F
Tackles pet hair and ground-in dirt from above-
floor areas like carpeted stairs and upholstery,
while actively removing hair wrap as it cleans.
Home & Car Detail Kit
G
Deep-clean your car like a professional detailer,
or clean hard-to-reach areas in your home. Micro-
sized tools let you clean around delicate objects
and access the tightest spaces like car vents and
computer keyboards.
Large Accessory Bag
H
This convenient accessory storage bag measures
32 cm x 70 cm and fits the Under-Appliance Wand.
Smaller size available at sharkaccessories.com.
NOTE: Not all accessories come with all units. For a list of the accessories included with this model, see the top
inside flap of the box. To order additional accessories, visit sharkaccessories.com.
s h a r kc l e a n . c o m
A B
C
D
E F
G H

TROUBLESHOOTING

Power cord caught in brushroll or floor nozzle.
• To minimize the risk of power cord damage, DO NOT run the vacuum over the power cord.
If this occurs, immediately shut off power to the vacuum and remove the cord from the
brushroll or nozzle.
• Inspect power cord and plug for any damage before use. DO NOT use vacuum cleaner with
a damaged cord or plug. Turn off all controls before plugging in or unplugging the vacuum
cleaner. Store your vacuum cleaner with the power cord secured around the two cord hooks.
Vacuum is not picking up debris. No suction or light suction.
• Check filters to see if they need cleaning. Follow instructions for rinsing and air-drying the
filters before reinstalling.
• Dust cup may be full; empty dust cup.
• Clear any blockages in the hose, hose connections, nozzle, wand, pod, or accessories. See
Checking for Blockages section for more information.
• If any hair is wrapped around the brushroll, continue vacuuming. This will allow the self-
cleaning brushroll to remove the hair wrap and send it to the dust cup. If some fibers remain
wrapped around the brushroll after continued use, open the brushroll cover to remove them.
Vacuum lifts area rugs.
• Make sure Power/Surface switch is set to Hard Floor (setting I).
• Suction is powerful. Take care when vacuuming area rugs or rugs with delicately sewn edges.
• To minimize suction, set the suction control slider to MIN. See the Suction Control section
for more information.
Brushroll does not spin.
• If the brushroll indicator light turns red, immediately turn off and unplug the vacuum.
Remove pod from floor nozzle and clear any blockages. Reconnect nozzle, plug in vacuum,
and turn on power.
• With the power on, recline the handle, which will automatically turn on the brushroll.
Vacuum turns off on its own or indicator light flashes red.
If your vacuum overheats, the thermostat will automatically turn off the motor. Follow these
steps to restart:
1. Turn vacuum off and unplug it.
2. Empty dust cup and clean filters (see Emptying the Dust Cup and Cleaning the Filters).
3. Check for blockages in hose, wand, nozzle, accessories, and inlet openings.
4. Allow unit to cool for a minimum of 60 minutes.
5. Plug in vacuum and turn it on.
For all other issues, please visit our website at sharkclean.com/support.
s h a r kc l e a n . c o m