Turn Off Map Display; Hide Poi - TomTom 2004 User Manual

TomTom Navigator - User Guide
Related topic:
To navigate with the schematic view, see the
4.3. Turn off map display / Turn on map display
You can navigate using either the
information about your current situation, including a map. The schematic view is focused on the next driving
instruction.
If map display is used, switch to the schematic display by tapping Turn off map display
If schematic display is used, switch on the map display by tapping Turn on map display
Related topics:
For more details about the schematic view, see the
To automatically hide the map when you drive faster than a certain speed, use the
option.
Note:
If you have set a "schematic speed,"
exceeds the schematic speed. The "turn map display on" option will NOT override this safety feature.
4.4. Hide POI / Show POI
The main screen can show points of interest (POI) as icons in the map. Every category of POI will be shown using its
own icon. This Hide POI/Show POI preference either shows all specified POI categories or no POI's on the map.
If Points Of Interest are shown, they can be hidden by tapping Hide POI
If no Points Of Interest are shown, you can make them appear by tapping Show POI
Note:
Only those categories of POI that have been
not see any POI on the map even if you use the "Show POI" option.
Related topics:
To specify which particular categories of Point Of Interest are shown, use the
option.
4.5. Turn off sound / Turn on sound
You can turn off the voice that gives navigation instructions. You will then have to rely on the visual instructions on
your screen to navigate. To hear the navigation instructions again, turn on the sound once more. If the sound is
switched off, this is indicated during navigation by the
If the sound is currently switched on, switch it off by tapping Turn off sound
"Turn off map display" preference option.
map display or the schematic
"schematic view"
your display will automatically turn off the map display when your driving speed
enabled will be shown. If no POI categories have been enabled, you will
icon in the lower left-hand corner of the screen.
display. The map display gives you the most detailed
description.
"Set schematic speed" preference
.
.
"Enable/Disable POI" preference
.
Page 23 of 36
.
.