Turn Off Map Display; Enable/Disable Pois - TomTom Rider User Manual

Turn off 3D display / Turn on 3D display
Tap this button to view the map from above while you are navigating.
Turn off 3D
display
To switch back to seeing the map from your perspective as you drive, tap
Turn on 3D display.
When should I use this?
Turn on 3D
display
In some situations, it is easier to see the map from above. Perhaps if the
roads are very complicated or if you are walking and using your RIDER to
navigate.

Turn off map display

When you turn off the map display, instead of seeing your position on a map
in the Driving View, you will only see information about the next instruction.
When you tap this button, you have to specify when the map should be turned
off. These are the options:
• Always - you will only see information about the next instruction and
arrows. The map will never be shown.
• Above a certain speed - you set the speed at which the map is switched off.
When you are driving fast, the map can be distracting.
• Never - the map is never switched off.
To switch the map back on again, tap Turn on map display.
Turn on map
display

Enable/disable POIs

Tap this button to set which categories of Points of Interest (POIs) should be
shown on the map.
Enable/
disable POIs
Select the POIs that you want to see on the map from the list:
37