Planning From A To B - TomTom 2004 User Manual

TomTom Navigator - User Guide Page 18 of 36
Show route Show route instruction is not available when you have no route calculated.
instructions

3.1 Planning from A to B

Calculate a route between two selected locations, in the menu tap Plan from A to B .
Without a valid GPS signal you can still calculate a route using "planning from A to B". This is typically the case when
you are not in your car. "Planning from A to B" is a valuable function when you want to prepare for your trip in
advance, you want to find out how long a certain journey would take, or when you want to find out how someone
should travel to you.
The difference with "Navigate to..." is the departure location of your trip. Where "Navigate to..." uses you current GPS
location as the departure, "Planning from A to B" requires you to enter the departure manually.
Use the locations picker to set any type of location to depart from.
For fast selection, TomTom Navigator offers you the option to use your last destination again. If you have not
calculated a route before, this option will not be offered.