Switch Map - TomTom 2004 User Manual

TomTom Navigator - User Guide
On the GPS status screen is shown:
The longitude and latitude are displayed using the
The driving direction is shown in degrees compared to the north
The driving speed
The Universal Time Code (UTC), the time according to the GPS signal (not the local time)
An icon that shows (when circling) if your GPS device is well connected and if it is receiving data
The schematic representation of the sky showing the positions of the satellites
Measuring bars for the signal strength of each visual satellite, locked satellites are shown in blue
Configure GPS
Use and to browse through the list of supported GPS devices until your GPS device is shown. Specify your
GPS device by selecting DONE.
Note:
When you select "Other Cable NMEA GPS" as your GPS device, you may need to specify a baud rate. Refer to your
NMEA GPS receiver manual to find out the baud rate used. For many devices, this will be 4800 baud.
Related topics:
To specify the units for displaying longitude/latitude, use the
To specify the units for displaying distance, use the

4.9. Switch map

Switch to the map of another country or area by tapping Switch map
This option allows you to select a map from a list of available maps. Certain maps come pre-installed on your SD
card, others can be installed using your CD-ROM.
distance units
"set units " preference
"set units" preference option.
.
Page 26 of 36
option.