Table of Contents
Advertisement
UNPACKING
This product must be assembled correctly before use.
Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
PACKING LIST (Fig. 2)
•
Tilling head (1 piece)
•
Upper and lower handle sections (1 piece)
•
Auxiliary handle (1 piece)
•
Wing nuts with bolts attached (2 pieces)
•
ST3.9X16 screws (2 pieces)
•
Side cover (1 piece)
•
Battery pack (1 piece)
•
Battery charger (1 piece)
•
Owner's manual (1 piece)
If any parts are damaged or missing, please call our
customer service help line at 1-800-633-1501 for
assistance.
2
UPPER AND LOWER HANDLE SECTIONS (Fig. 3A)
•
Slide the lower handle section into the upper handle
section.
•
Line up the holes on each tube, and make sure the
cable is clear of the mounting holes.
•
Secure the two sections together with the M6x45
carriage bolt and wing nut.
ASSEMBLY
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product .
WARNING: Do not install battery until assembly is
complete. Failure to comply could result in accidental
starting and possible serious personal injury.
WARNING: If any parts are damaged or missing do not
operate this product until the parts are replaced. Failure
to heed this warning could result in serious personal
injury.
WARNING: Do not attempt to modify this product or
create accessories not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to
possible serious personal injury.
PACKING LIST
4
Model TC70020-1
Advertisement
Table of Contents
