Setting the Image Sharpness (Sharpness)
You can give an image sharp or soft outlines.
1
Use the four-way controller (23) to select [Sharpness] in the
[A Rec. Mode] menu.
2
Use the four-way controller (45) to change the sharpness level.
Soft
F
Normal
G
Sharp
H
Setting the Saturation/Tone Adjustment
You can set either color brightness (Saturation) or the tone of monochrome
images (Tone Adjustment).
The menu item to be displayed changes depending on the [Image Tone] selected
in the [A Rec. Mode] menu.
Selected Image Tone
Bright, Natural, Vibrant, Slide Film
Monochrome
* cannot select the level (fixed to Normal)
1
Use the four-way controller (23) to select [Saturation (or
Tone Adjustment)] in the [A Rec. Mode] menu.
2
Use the four-way controller (45) to select the level of
saturation (or color tone for Tone Adjustment).
F
G
H
Setting the Image Contrast (Contrast)
For setting the image contrast level.
1
Use the four-way controller (23) to select [Contrast] in the
[A Rec. Mode] menu.
2
Use the four-way controller (45) to change the contrast level.
Low
F
Normal
G
High
H
Displayed item
*
Saturation
Tone Adjustment
Low
(Blue for Tone Adjustment)
Normal
(B&W for Tone Adjustment)
High
(Sepia for Tone Adjustment)
3
95