Table of Contents
Advertisement
• Confirm that the battery is sufficiently charged before starting interval
movie recording. If the battery is not sufficiently charged, it may become
depleted during interval movie recording and cause recording of the movie
to stop.
• For interval movie recording, the following settings are fixed. Recorded
Pixels:
and Flash Mode: a.
• Interval movie recording stops if the SD Memory Card is removed or
inserted during standby.
• Sound cannot be recorded during interval movie recording.
• When you use the SD Memory Card, use SD Speed Class 4 or higher
cards.
3
• If you set a start delay, a start time corresponding to the current time and
the start delay you set is displayed in real time.
• The total time you can set differs according to the shooting interval you set,
as indicated in the table below.
• The Date Imprint function (p.96) is available for Interval Movie mode.
106
, Frame Rate: 30 fps, Quality Level: C, Movie SR: P (Off),
Interval
10 minutes to 5 hours and 59 minutes
1 min.
(in increments of 1 minute)
30 minutes to 29 hours and 55 minutes
5 min.
(in increments of 5 minutes)
1 hour to 59 hours and 50 minutes
10 min.
(in increments of 10 minutes)
3 hours to 179 hours and 30 minutes
30 min.
(in increments of 30 minutes)
1 hr.
Total time that can be set
30 fps
6 hours to 359 hours
(in increments of 1 hour)
Advertisement
Table of Contents
