Setting The Image Sharpness (Sharpness); Setting The Saturation/Tone Adjustment - Pentax WG-3 GPS Operating Manual

Setting the Image Sharpness (Sharpness)

You can give an image sharp or soft outlines.
1
Use the four-way controller (23) to select [Sharpness] in the
[A Rec. Mode] menu.
2
Use the four-way controller (45) to change the sharpness
level.
F
G
3
H

Setting the Saturation/Tone Adjustment

You can set either color brightness (Saturation) or the tone of monochrome
images (Tone Adjustment).
The menu item to be displayed changes depending on the [Image Tone] selected
in the [A Rec. Mode] menu.
Selected Image Tone
Bright, Natural
Monochrome
1
Use the four-way controller (23) to select [Saturation (or
Tone Adjustment)] in the [A Rec. Mode] menu.
2
Use the four-way controller (45) to select the level of
saturation (or color tone for Tone Adjustment).
F
G
H
106
Soft
Normal
Sharp
Displayed item
Saturation
Tone Adjustment
Low (Blue for Tone Adjustment)
Normal (B&W for Tone Adjustment)
High (Sepia for Tone Adjustment)