Suppressing Wind Noises During Movie Recording (Wind Suppression); Combining Pictures Taken At A Set Interval Into A Movie (Interval Movie) - Pentax R07020 Operating Manual

Suppressing Wind Noises during Movie
Recording (Wind Suppression)
You can reduce wind noises during movie recording.
The default setting is P (Off).
1
Use the four-way controller (23) to select [Wind
Suppression] in the [C Movie] menu.
2
Use the four-way controller (45)
to select O (On)/P (Off).
3
O(On)
P (Off)
The setting is saved.
Combining Pictures Taken at a Set Interval into a
Movie (Interval Movie)
In this mode, you can record multiple still pictures taken automatically at a set
interval from a set time, as a movie file.
Interval
Total Time
Start Delay
1
Use the four-way controller (2345) to select
Movie) from the Capture Mode Palette.
2
Press the 4 button.
The current Interval Movie settings appear for approximately one minute. To
take pictures with the current settings, go to step 10.
3
Press the 4 button while the current settings are displayed.
The Interval Movie setting screen appears. [Interval] is marked with the frame.
104
Suppresses wind noises.
Does not suppress wind
noises.
Set the shooting interval to 1 minute, 5 minutes, 10 minutes, 30 minutes,
or 1 hour.
Set the total time, from 10 minutes to 359 hours. The total time and the time
unit change depending on the interval set. The total time can be set in
increments of 1 minute, 5 minutes, 10 minutes, 30 minutes, or 1 hour.
Set the start delay, from 0 minutes to 24 hours. You can set this in 1-
minute increments. If the start time is set to 0 minutes, the first picture is
taken as soon as the shutter release button is pressed.
Movie
Recorded Pixels
Mov i e SR
Wind Suppression
Exit
MENU
(Interval