Download Print this page

Toastmaster TMDC24 Installation Operation & Maintenance page 5

Toastmaster tmdc24 countertop: user guide
Hide thumbs Also See for TMDC24:

Advertisement

M
D
C
EDIUM
UTY
OUNTERLINE
CLEARANCES
There must be adequate clearance between units and adjacent construction. Clearance must also
be provided for servicing and for operation.
Minimum Clearances from COMBUSTABLE construction:
Sides
Back
Bottom
Minimum Clearances from NON-COMBUSTABLE construction:
Sides
Back
Bottom
VENTILATION
Improper ventilation can result in personal injury or death. Ventillation which fails to propely remove
flue products can cause headaches, nausea, or could result in death.
All units must be installed in such a manner that the flow of combustion and ventilation air are not
obstructed. Provisions for adequate air supply must be provided. Do not obstruct the front of the
unit at the top by the control panel as combustion air enters these areas.
Proper ventillation is the owner's responsibility. Any problem due to improper ventilation will not be
covered by the warranty.
All units must be installed in such a manner that the flow of combustion and ventillation air are not ob-
structed. Provisions for an adequate air supply must be provided. Do not obstruct the front or rear of the
unit, as combustion air enters through this area. Be sure to inspect and clean the ventillation system
according to the ventillation equipment manufacturer's instruction.
In case of unsatisfactory performance on any appliance, check the appliance with the hood exhaust fan in
the "OFF" position. Do this only long enough to check equipment performance. Then turn the fan back on
and left it run to remove any exhaust that may have accumulated during the test.
P
5
AGE
WARNING
Griddle Models
4"
4"
4"
Griddle Models
Charbroiler Models
0"
0"
4"
WARNING
NOTICE
S
Open Top Models
6"
6"
6"
Open Top Models
4"
0"
4"
0"
4"
4"
PECIFICATIONS
Toastmaster
®

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Tmdc36Tmdg24Tmdc48Tmdg36Tmdo12Tmdo24 ... Show all