Trim Support Setting - Honda BF40 Owner's Manual

(4) Trim Support Setting

You can configure the trim support function.
● Selecting the target engine
adjustment
You can select ALL to select all the engines for which to select
and adjust a pattern or select an engine individually. To set the
pattern to apply when using the trim support function and
adjust the pattern, select the desired engine first.
• Under the following condition, Trim Support Setting is
grayed out and cannot be configured.
– Trim Support is ON. (P.11)
1. Use the [ ∧ ] or [ ∨ ] button to select BOAT SET and press the
[ENTER] button.
2. Use the [ ∧ ] or [ ∨ ] button to select Assist Function and
press the [ENTER] button.
3. Use the [ ∧ ] or [ ∨ ] button to select Trim Support Setting
and press the [ENTER] button.
> Pattern setting > Pattern
4. Use the [ ∧ ] or [ ∨ ] button to select Engine and press the
[ENTER] button.
5. Use the [ ∧ ] or [ ∨ ] button to select the engine you want to
set and press the [ENTER] button.
• If ALL is selected, you will configure the pattern setting
to be applied when using the trim support function on all
the engines at once.
• If an individual engine is selected, you will individually
configure the pattern setting to be applied when using
the trim support function.
12
To "Configuring the settings" (P.8)