Engine Information Screen; Main Screen - Honda BF40 Owner's Manual

Engine information screen

The engine information screen consists of three screens, the
main screen, the maintenance check screen, and the engine
warning screen, which can be switched using the [ ∧ ] or [ ∨ ]
button.

Main screen

The main screen has four layouts.
• Graph screen layout
• Single screen layout
• Triple screen layout
• Quad screen layout
The layout is different depending on the number of engines
that have been specified. You can change the contents, the
number of pages, and the layout. (P.27)
In this example, the graph screen layout and the quad screen
layout are used to explain the display contents.
● Graph screen layout
Displays information about a single engine.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1) GPS loss notification icon
If no GPS signal is received, the following icon appears.
(2) Check Engine (P.6)
(3) Charge Indicator (P.6)
(4) Low Oil Pressure (P.6)
(5) Over Temperature (P.6)
(6) Engine Check alert (P.6)
(7) Maintenance icon
When the engine maintenance time has come, the
maintenance icon appears.
(8) You can select three of the following options. (bar
display)
Trim angle
Engine boost pressure
Engine temperature
Battery voltage
Fuel level
Instantaneous fuel consumption
(16) (15) (12)
(9) (10) (11) (12)
(9) Total operation time
(10) Engine speed (analog display)
Green: ECO mode display
Blue: Trolling speed control mode display*1
(11) Engine speed (digital display)
Blinking: Fast idle mode*2
(12) Cruise control mode
When the cruise control mode is ON, CRUISE appears
at the lower right of the screen, along with the engine
speed or boat velocity.
An icon also appears to indicate that the cruise control
mode is ON.
On the main screen in a layout other than the graph
(14)
screen layout, only CRUISE appears at the lower right
of the screen, along with the engine speed or boat
velocity.
(13) Shift position*3
(14) Velocity
(15) Trim support mode
When the trim support mode is ON, the trim icon lights
up blue.
Even when the trim angle is displayed on the main
(13)
screen in a layout other than the graph screen layout,
the icon lights up blue when the trim support mode is
ON.
(16) Number of the engine currently selected
*1: Only DBW and mechanical models BF115, BF135, BF140, and
BF150; and DBW models BF175, BF200, BF225, BF250, and BF350
*2: Only DBW models BF175, BF200, BF225, BF250, and BF350
*3: DBW models BF175, BF200, BF225, BF250, and BF350 display
N/F/R, and other models display only N.
4