Configure Wireless Network - TP-Link RE220 User Manual

Chapter 5
5 2

Configure Wireless Network

If you want to extend another host network after Quick Setup, you can refer to this
section. Moreover, you can change the wireless settings for your extended networks.
Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
• To extend another host network:
1. Go to Settings > Wireless
2. Enable Connect to 2.4GHz Network
networks.
3. Select the 2.4GHz host network you want to extend.
Note:
If the network you want to extend is on but not listed, please try the following steps.
· Move the extender closer to your router, and click
· You can manually enter the SSID (network name) and password of the network you want to extend, and click Save.
4. Once a host network is selected, the SSID and security type will be automatically
filled in. If the selected network is encrypted, enter the password in the
field.
5. Click Save.
• To enable or disable the extended network:
1. Go to Settings > Wireless
> Connect to Network.
and click
Rescan in the top-right corner of the list.
> Extended Network.
Customize Your Network
Wireless Scanner to find all available
Password
27