Configure Wireless Network - TP-Link Archer Air E5 User Manual

Ax3000 wi-fi 6 air range extender

Hide thumbs Also See for Archer Air E5:

Table of Contents

Chapter 5

5 2

Configure Wireless Network

If you want to extend another host network after Quick Setup, you can refer to this

section. Moreover, you can change the wireless settings for your extended networks.

Tip:

If the extender is in your router's OneMesh network, it will automatically copy wireless settings from your router. No

wireless settings is needed for the extender.

Visit http://tplinkrepeater.net, and log in with your TP-Link ID or the password you set

for the extender.

Note:

Here we take the configuration of the 2.4GHz network as an example. If the 5GHz network is available on your extender,

please refer to the instructions to set your 5GHz network.

•

To extend another host network:

1. Go to

Settings

Wireless

2. Enable

Connect to 2.4GHz Network

networks.

3. Select the 2.4GHz host network you want to extend.

Note:

If the network you want to extend is on but not listed, please try the following steps.

· Move the extender closer to your router, and rescan for networks.

· You can manually enter the SSID (network name) and password of the network you want to extend, and click Save.

4. Once a host network is selected, the SSID and security type will be automatically

filled in. If the selected network is encrypted, enter the password in the

field.

Connect to

Network.

and click

Customize Your Network

Wireless Scanner

to find all available

Password

Table of Contents