Advertisement
Operation
Warning before starting operation
•
Before using the petrol engine for the first time, be sure to read the chapter on safety measures
and inspection before use.
•
To achieve full performance, it is recommended that the new product is allowed to warm up for
15 min before use.
•
Please read the safety instructions carefully and familiarise yourself with starting, switching off,
and operating the motor.
•
Do not use the petrol engine if the surface on which it is to be used is inclined at 20° or more.
Warning!
Do not use the motor in enclosed spaces. Carbon monoxide in exhaust fumes can reach
dangerous concentrations in enclosed spaces, which can lead to unconsciousness and even death. –
Petrol engines must not be operated in closed rooms, not even in semi-ventilated rooms where people
are present. It is important to ensure that enclosed spaces are adequately ventilated to prevent carbon
monoxide poisoning.
Starting the engine
1.
If the fuel tank is equipped with a fuel tap, make sure that the fuel tap is set to "ON" before
starting the petrol engine.
2. Turn the potentiometer button anti-clockwise to the starting position for the idle speed.
№
1
On-button start switch
3. Start the engine by pressing and holding the on-button starter switch until the petrol engine
starts. If the petrol engine does not start successfully after more than 5 s, release the switch for
10 s before pressing it again.
Important!
Do not use the starter motor for longer than 5 s, otherwise the starter motor may
overheat or be damaged.
4. Allow the petrol engine to warm up for 2–3 min.
Turning off the engine
To switch off the engine in an emergency, please proceed as follows. Additional information is found in
the user's manual.
1.
Press the on-button start switch.
2. If the fuel tank is equipped with a fuel tap, set the tap to the "OFF" position.
© by WilTec Wildanger Technik GmbH
http://www.wiltec.de
Name
Item 92670
№
2
Potentiometer button
Name
Page 6
11 2023-1
Advertisement
