Download Print this page
WilTec XPOTool GK420 Operation Manual

WilTec XPOTool GK420 Operation Manual

Petrol engine

Advertisement

Quick Links

Operation Manual
Petrol Engine
99200–99202, 99204–99207, 99209, 99210
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

Advertisement

loading

Summary of Contents for WilTec XPOTool GK420

  • Page 1 Operation Manual Petrol Engine 99200–99202, 99204–99207, 99209, 99210 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly. Updating the documentation If you have suggestions for improvement or have found any irregularities, please contact us.
  • Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
  • Page 3 Introduction Thank you for purchasing this quality product. To minimise the risk of injury we urge that our clients take some basic safety precautions when using this device. Please read the operation instruc- tions carefully and make sure you have understood its content. Keep these operation instructions safe.
  • Page 4 Before commissioning the device keep the following advice in mind: • Make sure that all fuel lines are connected and firmly attached, so that no leakage may occur. • Make sure that all screws and nuts are firmly tightened. • Check the fuel and oil level and if necessary, re-fill fuel or oil.
  • Page 5 Starting and stopping the engine Open the throttle (1) and the drain screw (3) of the carburettor. Once the fuel runs out, the drain screw (3) may be refastened. Then you can start the engine as usual. № Name Throttle lever Throttle valve opened Drain screw The engine may be run only within the rated power and rated speed.
  • Page 6 № Name № Name Choke Carburettor drain screw Choke not activated On/off switch № Name № Name Ignition off Ignition switch If you want to stop the engine, reduce the speed to a minimum, set the choke to Off and turn the on/off switch to off.
  • Page 7 № Instruction/name . mm Dismount spark plug. Adjust electrode. Oil drain screw Oil filler Max. oil level Clean the fuel tank every 100 hours of operation. For this, the tank should be taken from the holder and rinsed. The fuel filter should periodically be cleaned. If the engine shall be stored for long periods of time, the fuel tank shall be completely emptied and the carburettor emptied on his discharge screw.
  • Page 8 Technical specifications Item no. 99202 99204 99207/99210 99200/99205/99209 Engine designation 2000 (E) 270 (E) 390 (E) 420 (E) Engine capacity (㎤) Spark plug type F7TC Max. Power 4.1 kW 5.8 kW 7.8 kW 8.8 kW with with 3600 rpm with 3600 rpm with 3600 rpm 3600 rpm Starting device...
  • Page 9 Engine bore (㎜) 68x54 77x58 88x64 90x66 Ignition Transistor/magneto Engine stop system Circuit to ground Wiring diagrams Wire colours and codes Black Brown Yellow White Green Combination switch With oil alert and without electric starter Spark plug Engine switch Oil level switch Oil alert unit https://www.XPOtool.com Item 99200–99202, 99204–99207, 99209, 99210...
  • Page 10 With oil alert and electric starter Starter motor Charging coil Starter solenoid Battery Rectifier Fuse Ignitor Engine switch Spark plug Circuit breaker Oil alert unit Oil level switch Control box https://www.XPOtool.com Item 99200–99202, 99204–99207, 99209, 99210 Page 10 The Tool Experts 09 2022-1...
  • Page 11 Measures https://www.XPOtool.com Item 99200–99202, 99204–99207, 99209, 99210 Page 11 The Tool Experts 09 2022-1...
  • Page 12 https://www.XPOtool.com Item 99200–99202, 99204–99207, 99209, 99210 Page 12 The Tool Experts 09 2022-1...
  • Page 13 https://www.XPOtool.com Item 99200–99202, 99204–99207, 99209, 99210 Page 13 The Tool Experts 09 2022-1...
  • Page 14 https://www.XPOtool.com Item 99200–99202, 99204–99207, 99209, 99210 Page 14 The Tool Experts 09 2022-1...
  • Page 15 https://www.XPOtool.com Item 99200–99202, 99204–99207, 99209, 99210 Page 15 The Tool Experts 09 2022-1...
  • Page 16 Important ote: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. https://www.XPOtool.com Item 99200–99202, 99204–99207, 99209, 99210 Page 16 The Tool Experts...