Subscribe to Our Youtube Channel
Related Manuals for STL T-TG48
Summary of Contents for STL T-TG48
- Page 1 / 60 TAILGATE ” ” LIGHTBAR T-TG48 T-TG60 INSTRUCTION MANUAL SpeedTech Lights, Inc © 2020...
- Page 2 This document must be delivered to and read by the end user and installer as it serves to provide you with the required information for proper and safe use of your STL product. Before operating this or any STL products the user and installer must read this manual all the way through. You will find important information in this manual that could prevent property damage and/or serious injury to the user and installer.
- Page 3 Grommets, cable ties, looms, and other installation hardware should be used to anchor and protect all wiring. Fuses should be properly sized and located as close to the power take off points as possible to protect the wiring and device. To protect against short circuits, a fuse is included by STL for all products.
- Page 4 / 60 TAILGATE ” ” LIGHTBAR Wiring Diagram Wire Color Function Wire Color Function White Ground Yellow Left Turn Signal / Brake Running / Headlight Right Turn Signal / Brake Green Brown NOTE: All cables except Ground contact +12 VDC. Thin White Reverse Specifications...
- Page 5 / 60 TAILGATE ” ” LIGHTBAR Mounting the Tailgate Lightbar • Unhinge and remove your tailgate. • Clean the mounting area thoroughly and make sure to remove all dirt and dust to ensure best adhesive contact. • Peel off the red protective film from the adhesive tape. •...
Need help?
Do you have a question about the T-TG48 and is the answer not in the manual?
Questions and answers