Download Print this page
STL PA 100 Watt Public Address Operation Manual And Instructions

STL PA 100 Watt Public Address Operation Manual And Instructions

Advertisement

Quick Links

218 Trademark Dr
Buda
Texas •78610
Phone 800.757.2581
Fax 844.894.2652
Email customerservice@speedtechlights.com
STL PA
100 Watt Public Address
Operation Manual and Instructions
Congratulations, you are the owner of a STL PA™ 100 Watt Public Address! Your Public Address
is equipped with the latest technology and features at the best value found industry wide,
GUARANTEED. In addition to that, your purchase comes with the STL 2 Year Warranty against
any manufacture defects that may occur with your bar. So please read this document carefully
and call Customer Service at 800-757-2581 Monday - Friday 8:30 AM - 4:30 PM central time if
you need assistance. We are available and happy to help!
Warnings and Notices for Users and Installers
WARNING: Take CAUTION when installing a siren system. Adequate hearing protection
for you and those within the immediate vicinity is mandatory since sirens emit extremely
loud warning tones. Loud noise can cause hearing damage and/or loss. Refer to OSHA
1910.95 prior to operating a siren unit for occupational noise exposure guidelines. .
This document must be delivered to and read by the end user and installer as it serves to
provide you with the required information for proper and safe use of your STL product. Before
operating this or any STL products the user and installer must read this manual all the way
through. You will find important information in this manual that could prevent property damage
and/or serious injury to the user and installer.
STL products are intended to alert pedestrians and other operators of the presence of
personnel, the operation of emergency vehicles, an emergency site, and any warning needs. This
does not ensure that pedestrians or drivers will react, heed, or observe emergency warning
signals. Nor does the use of emergency signals grant or ensure you the right of way. It is your
responsibility to make sure you can proceed safely before driving against traffic, entering an
intersection, responding to a high rate of speed, or walking on or around traffic lanes.
Your STL emergency vehicle devices should be tested daily to insure the device and all it's
functions are operating correctly. If you experience a malfunction contact STL's Customer
Service immediately for troubleshooting options, or a warranty or service claim. You must
ensure sure that the projection of the visual and audible is not blocked by vehicle components
(i.e.: open trunks, visors, compartment doors), vehicles, other obstructions, or people.
STL's sirens and other audible devices project sound in a forward direction and should be
installed in a forward direction that faces away from the occupants of the vehicle.

Advertisement

loading
Need help?

Need help?

Do you have a question about the PA 100 Watt Public Address and is the answer not in the manual?

Questions and answers

Summary of Contents for STL PA 100 Watt Public Address

  • Page 1 STL product. Before operating this or any STL products the user and installer must read this manual all the way through. You will find important information in this manual that could prevent property damage and/or serious injury to the user and installer.
  • Page 2 SRS wiring, or sensors. All STL equipment needs to be mounted and installed according to the vehicle manufactures instructions and securely attached to a part of the vehicle of sufficient strength to withstand the forces applied to the equipment.
  • Page 3 - Never take any lights through a car wash. Use only water to clean the outer body/lens of your equipment. - Never use a pressure washer to clean any STL products. Inspect and test your product daily to insure it operates properly and is mounted correctly.
  • Page 4 With a durable microphone including and the entire amplifier and faceplate built in together, the installation of this PA 100-watt horn system in simple and can be wired to any of STL's 100-watt speakers.
  • Page 5 Blue Speaker wire Blue Speaker wire Unpacking your STL Product Unpack your unit to identify all parts including but not limited to: lightbar, switch box, brackets, screws, bolts, wiring harness, fuses, etc. Some parts may be in small bags Some parts such as Gutter Brackets, may be in the foam protection. Double check that no parts are left within the foam protection or left in the box.
  • Page 6: Maintenance

    To protect against short circuits, a fuse is included by STL for all products. Do NOT use a fuse with a higher amp rating than the initial fuse included. Do NOT use Circuit Breaks with STL Products. Ground terminations should only be made directly to the battery.
  • Page 7: Troubleshooting

    All Manufacture Defects are covered under the STL Warranty accordingly. Warranty is void with disassembly or rewiring of STL Products. If you are unsure how to trouble shoot your Siren or Speaker for any reason call Customer Service immediately for assistance at 800-757-2581.