Toa NX-100 Operation Manual
  1. Manuals
  2. Brands
  3. Toa Manuals
  4. Adapter
  5. NX-100
  6. Operation manual

Toa NX-100 Operation Manual

Network audio adapters
Hide thumbs Also See for NX-100:
1
2
3
4
5
6

Advertisement

Table of Contents

See also: Cookbook , User Manual
NETWORK AUDIO ADAPTERS
Thank you for purchasing TOA's Network Audio Adapters.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.
TABLE OF CONTENTS
......................................................... 3
.............................. 2
OPERATIONS MANUAL
NX-100
NX-100S
.......................... 4
.......... 6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NX-100 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Toa NX-100

Summary of Contents for Toa NX-100

  • Page 1 NETWORK AUDIO ADAPTERS Thank you for purchasing TOA's Network Audio Adapters. Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment. TABLE OF CONTENTS 1. OPERATION SCREEN ... 2 2. MENU ... 3 OPERATIONS MANUAL...
  • Page 2 1. OPERATION SCREEN (Operation screen example) (1) Selection Button Selects broadcast locations. (2) Group Button Simultaneously selects two or more Selection buttons. (3) Start Button Starts the broadcast selected with the Selection or Group button. (4) End Button Quits broadcasts. (5) Message Display Area Displays responses to operations or error contents.
  • Page 3 2. MENU 2.1. File Exit: Exits the software program in use. 2.2. Setting Button setting: Not used during operation. (Used for settings only. Entry of both system name and password are required to perform the settings.) Unit settings: Not used during operation. (Used for settings only. Entry of both system name and password are required to perform the settings.) 2.3.
  • Page 4 3. MAKING BROADCASTS Step 1. Start the NX-100 Operation Program by double-clicking on the operation program's desktop shortcut or the "nx100_control.jar" application created in the program's installed folder. The operation screen is displayed. (Operation screen example) Step 2. Press either the Selection or Group button to select broadcast locations.
  • Page 5 Depending on the displayed messages, perform operation again after temporarily terminating the program and waiting a short time, or after correcting any setting- or unit-related problems. The Selection buttons change to orange if a connection is made to at least one of the NX-100 or NX-100S units programmed for that button.
  • Page 6 4. ERROR MESSAGES (EXAMPLES) Message • "OO" connection failure. - Maximum number of connectable PCs exceeded. • No start. - Designated unit busy. • "OO" contact output "XX" already ON. • "OO" contact output "XX" turned OFF by other contact or PC. •...

This manual is also suitable for:

Nx-100s

Table of Contents