Toa NX-100 Specifications

NETWORK AUDIO ADAPTER
DESCRIPTION
The NX-100 Network Audio Adapter can transmit high-quality
audio signals and such control data as serial data over IP
networks, such as LAN or Internet, in real time.
It is especially useful when transmitting audio signals to
remote locations, as Internet use keeps running costs lower
than the use of dedicated lines.
With the use of an optional rack-mounting bracket, it can be
mounted in an EIA Standard rack (1 unit size).
APPEARANCE AND DIMENSIONAL DIAGRAM
Rear View
Front View
210
Side View
188
180
FEATURES
●
If there is no network delay, audio signals have only a
minimal millisecond delay.
●
Control data including contact and serial data can also be
transmitted along with the audio signals.
●
Two-way audio signal transmission is possible with a single
NX-100 unit as every unit is equipped with an audio input
and output.
●
The multicast-capable NX-100 allows simultaneous
transmission of audio signals to be made to multiple
locations depending on transmission method:
Unicast — up to 4 locations,
Multicast — up to 64 locations.
●
No audio signal degradation or loss, even when transmitting
over crowded networks such as the internet.
●
Greater data reliability using IP networks with the protocol's
ability to prevent data problems during transmission.
●
The NX-100's contact input can initiate and terminate
audio transmissions without having to use dedicated
control equipment such as a PC.
●
Hardware use ensures operational reliability over only
software-driven applications.
Audio
●
Using IP to transmit audio signals over the internet allows
low cost operation rather than dedicated lines.
●
The NX-100 is equipped with a DC input to allow operation
on AC as well as DC.
●
Software-driven operational menus enhance ease of use.
Unit: mm
NX-100