Table of Contents
Advertisement
1.0 IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS AIR FILTRATION UNIT.
To reduce the risk of fire, electric shock, or injury:
1.
Read and understand the entire owner's manual before attempting assembly or operation.
2.
Read and understand the warnings posted on the machine and in this manual. Failure to comply with all
of these warnings may cause serious injury.
3.
Replace the warning labels if they become obscured or removed.
4.
Do not use this air filtration system for other than its intended use. If used for other purposes, JET
disclaims any real or implied warranty and holds itself harmless from any injury that may result from that
use.
5.
Never duct a machine directly into the air filtration unit.
6.
To avoid a potentially dangerous situation, do not use this equipment to filter volatile fumes or smoke.
7.
Do not use this equipment to filter flammable vapors. This air filtration unit is designed and intended for
the filtration of air borne dust only. It is neither designed nor intended for any other purpose whatsoever.
8.
Keep visitors a safe distance from the work area. Keep children away.
9.
Make your workshop child proof with padlocks, master switches or by removing starter keys.
10.
DRUGS, ALCOHOL, MEDICATION. Do not operate tool while under the influence of drugs, alcohol or
any medication.
11.
Make certain the Power ON/OFF Switch is in the OFF position before connecting the machine to the
power supply.
12.
Make certain the machine is properly grounded.
13.
Use recommended accessories; improper accessories may be hazardous.
14.
GROUND ALL TOOLS. If tool is equipped with three prong electrical plug, it should be plugged into a
three-hole electrical receptacle. If an adapter is used to accommodate a two-prong receptacle, the
adapter lug must be attached to a known ground. Never remove the third prong.
15.
WARNING: Drilling, sawing, sanding, or machining wood products generates wood dust and other
substances known to the State of California to cause cancer. Avoid inhaling dust generated from wood
products or use a dust mask or other safeguards to avoid inhaling dust generated from wood products.
Wood products emit chemicals known to the State of California to cause birth defects or other
reproductive harm. (California Health and Safety Code Section 25249.6)
16.
Keep safety guards, panels, and doors in place, secured, and always closed when the machine is in
use. If removed for maintenance purposes, use extreme caution and replace the guards, install the
panels and close the doors immediately after completion of maintenance.
17.
Maintain tools with care. Keep filters clean for the best and safest performance.
18.
Turn off and disconnect the machine from power before cleaning. Follow the instructions under 10.2
Cleaning the Filters. Do not use your hands to remove debris from the filters.
19.
Do not use this air filtration unit with a damaged cord or plug. If the unit is not working as it should, has
been dropped, damaged, left outdoors, or dropped into water, return it to a service center.
20.
This machine is designed to operate while it is setting on the floor. Only use this machine with it setting
on a level, stable floor surface. Never place this machine on a bench, chair, table, cart, or any other
elevated surface, or where there is a risk of tipping over. Do not hang this machine from the ceiling or
any other structure.
21.
Do not block the top of the Fan Head or any portion of the perforated Steel Barrel.
22.
To reduce risk of electric shock, do not expose filtration unit to water or rain.
23.
Do not use in high humidity or wet environments. Doing so may cause electric shock and/or decreased
performance of the unit.
24.
WARNING: Not suitable for use with solid-state speed controls.
25.
Suitable for commercial or industrial use only.
2
Advertisement
Table of Contents
