Table of Contents
Advertisement
PUMP AND RAM ASSEMBLY INSTRUCTIONS
8
A
This end up
B
This end up
5240AO Operation Manual
Note: Handle ram carefully to avoid damage to gauge or gauge face.
Do not disconnect hoses prior to assembly.
Note: There are two sets of holes for bolts.
Use centermost holes on the side.
Note: Allow ram to rest on press
bed while installing pump.
Top of press frame, looking down
6
Note: Hose from pump's outer side must
run BEHIND the frame. Hose with nozzle will
be used later.
Rev: 08/10/06
Advertisement
Table of Contents
