Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
4
Cross-section of press
5
5240AO Operation Manual
CONTINUED
Use bolts, washers and nuts to attach
Z Bar to both sides of the press.
Note: Check all bolts for tightness.
If press rocks, or is not level, loosen press
feet slightly to compensate and retighten.
WARNING
Bed must be at the BOTTOM of the frame
before proceeding to the next step.
Slide bed down to bottom of frame
4
Front view
Front view
Note: When sliding bed to frame
bottom, DO NOT use bed handles.
Rev: 08/10/06
Advertisement
Table of Contents
