Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
1
Stand frame upside down
3
Inside of frame
5240AO Operation Manual
2
Slide bed onto frame
WARNING
Leg ends and press feet are sharp
and potentially dangerous. Wear
safety gloves and safety goggles.
Note: Position press feet on each side of the press.
Attach one bolt, washer and nut on each side.
Bolts should be attached OFFSET from one another.
Slide bed down to bottom of frame
3
Note: In the upright position,
inner bracing should form an
inverted "v" with the narrower
space facing the top of the press.
WARNING
Be aware of jagged edges
on frame. Not all welds are smooth.
Press bed can pinch or crush fingers.
Wear safety gloves.
Front view
Rev: 08/10/06
Advertisement
Table of Contents
