Table of Contents
Advertisement
INSTALLATION
Transporting the Unit
• When carrying the suspended unit, pass the ropes between legs of base panel under the unit.
• Always lift the unit with ropes attached at four points so that impact is not applied to the unit.
• Attach the ropes to the unit at an angle Ⓐ of 40° or less.
• Use only accessories and parts which are of the designated specification when installing.
• Forklift trucks are not available without a palette.
• Be careful not to damage the product when moving the forklift.
Air outlet grille
Always hold the unit by the corners, as holding
it by the side intake holes on the casing may
cause them to deform.
Sub line
40º or less
Intake hole
Corner
Handle
INSTALLATION
Forklift
47
Advertisement
Table of Contents
