Honda ACF110CBTR Owner's Manual page 56

Push the ignition switch while the Honda
c
SMART Key indicator is blinking. The Honda
SMART Key Indicator switches from blinking
to lighting
If the ignition switch is not pressed within
u
5 seconds, this mode will be cancelled
after the Honda SMART Key indicator
stops blinking and buzzer rings 1 time.
Try step and follow the procedure
b
again.
Repeat the following 3 times:
d
Press the Alarm/Answer back button on
the Honda SMART Key 2 times and the
ignition switch 1 time.
When the Alarm/Answer back button is
u
pressed, the Honda SMART Key LED
comes on. Make sure the LED goes off
before pressing the button again.
If the Alarm/Answer back button is not
u
pressed within 1 minute, this mode will
be cancelled after the Honda SMART Key
indicator stops blinking and buzzer rings
1 time.
Try step and follow the procedure
b
again.
Press the Alarm/Answer back button to
e
select from 3 levels for the sound volume.
The Honda SMART Key indicator comes on
while setting.
Wait for about 10 seconds until the Honda
f
SMART Key indicator starts blinking and
buzzer rings once. The sound volume level
is set.
The sound volume level is also set if you
u
push and hold the ignition switch for
about 2 seconds before the Honda
SMART Key indicator starts blinking.
Continued
51