Related Manuals for Feider Machines FMT400
Summary of Contents for Feider Machines FMT400
- Page 1 ORIGINAL INSTRUCTIONS INSTRUCTIONS MANUAL MULTI TOOLS FMT400 Warning: read the following instructions before using the machine BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux – France Made in PRC...
-
Page 2: Table Of Contents
CONTENTS SAFETY WARNINGS YOUR PRODUCT ASSEMBLY OPERATION MAINTENANCE AND STORAGE DISPOSAL DECLARATION OF CONFORMITY WARRANTY PRODUCT FAILURE WARRANTY EXCLUSIONS... -
Page 3: Safety Warnings
1. SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 4 away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. h) Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles.
- Page 5 Symbols Refer to the instruction handbook/booklet Wear eyes protection Wear ear protection Wear respiratory protection. Class II protection Intended use This tool is intended to be used for the sanding of little surfaces, corners, edges, for stripping, cutting little pieces in metal, wood or plastics. Do not use this tool for others purposes.
-
Page 6: Your Product
11. Wood/plastic blade (big) 12. Blades for wood and plastics 13. Sand paper 14. Sanding pad 15. Switch ON/OFF a. Technical data Model FMT400 Power 400W Voltage 230-240V˜ 50Hz Sound power level LwA = 95dB(A) K= 3dB(A) Sound pressure level... -
Page 7: Assembly
3. ASSEMBLY NOTE: The tool must be always switched off and unplugged before installation. a. Installation of accessories - Pull the lever to open the oscillating spindle. - Slide the accessory on the spindle. - Be sure that the holes of the accessory are engaged on the pins of the flange. Close the lever to lock the accessory in place. - Page 8 - When use the sanding pad, put on it a sanding paper. - Be sure that the large part of the accessory is placed outside of the tool (as showed in the picture). b. Dust extractor - Install the hole of the extractor dust around the flange. Screw it with in place with the pre- installed screw.
-
Page 9: Operation
c. Disassembly Switch off and unplug the tool When use the sander, remove the sanding paper first. Pull le lever of the spindle. Remove the accessory. 4. OPERATION a. Starting and stopping - Be sure that the assembly is correct. - Plug the tool to a socket. - Page 10 Cutting Use a flush cutting saw blade (or “e-cut blade”) for making precise cuts in tight areas, close to edges, plunge or flush to a surface. It is important not to force the tool during the flush cutting. If you are experiencing a strong vibration in your hand during the cut, it indicates too much pressure on the tool.
-
Page 11: Maintenance And Storage
5. MAINTENANCE AND STORAGE Maintain your tool regularly. This will keep your tool in good working order and extend its lifespan. Do not use abrasive, caustic agents to clean the tool. These types of products will damage your tool. Do not perform repairs by yourself. Repairs and inspection must be carried out by a competent person or at an authorized service center (please contact you service dealer). -
Page 12: Declaration Of Conformity
7. DECLARATION OF CONFORMITY BUILDER SAS 32, rue Aristide Bergès - ZI 31270 Cugnaux – France Declares that the machine Designation: MULTITOOLS Model: FMT400 Serial number: 20210163965- 20210164464 Is in conformity with the European Directives: Machine Directive 2006/42/EC EMC Directive 2014/30/EU... -
Page 13: Warranty
8. WARRANTY WARRANTY The manufacturer guarantees the product against defects in material and workmanship for a period of 2 years from the date of the original purchase. The warranty only applies if the product is for household use. The warranty does not cover breakdowns due to normal wear and tear. The manufacturer agrees to replace parts identified as defective by the designated distributor. -
Page 14: Product Failure
9. PRODUCT FAILURE WHAT TO DO IF MY MACHINE BREAKS DOWN? If you bought your product in a store: a) Empty the fuel tank. b) Make sure that your machine is complete with all accessories supplied, and clean! If this is not the case, the repairer will refuse the machine. -
Page 15: Warranty Exclusions
10. WARRANTY EXCLUSIONS THE WARRANTY DOES NOT COVER: • Start-up and setting up of the product. • Damage resulting from normal wear and tear of the product. • Damage resulting from improper use of the product. • Damage resulting from assembly or start-up not in accordance with the user manual. •...
Need help?
Do you have a question about the FMT400 and is the answer not in the manual?
Questions and answers