Table of Contents
Advertisement
EN
3.3 Display
The display (Fig. 3-4) shows following informations:
Washing time
End time delay
Error codes and service information
Display symbols
Speed, temperature, etc.
Symbol
Meaning
Drum door is locked
Control panel is locked
Anti-crease
Appliance is connected to Wi-Fi
Steam
3.4 Function buttons
The function buttons (Fig. 3-5) enable additional op-
tions in the selected programme before programme
starts. The related indicators are displayed.
By switching off the appliance or setting a new pro-
gramme, all options are disabled.
If a button has multiple options, the desired option can
be selected by pressing the button sequentially.
Note: Factory settings
To get best results in each programme Haier has well defi ned specifi c default settings.
If there is no special requirement default settings are recommended.
3.4.1-Function button "Delay"
Touch this button (Fig. 3-6) to start the programme
with a delay. End time delay could be increased in steps
of 30 minutes from 0,5-24h (End time will be longer
than original programme time). For example display off
6:30 means end of programme cycle will be in 6 hours
and 30 minutes.Touch "Start/Pause" button to acti-
vate the time delay. It is not applicable to programme
Spin, Refresh, Remote.
Note: Liquid detergent
If using liquid detergent, it is not recommended to activate the end time delay.
3-Control panel
Delay
Stain removal
Anti-crease
Delay
3-4
3-5
T emp.
Extra Rins e
S peed
3-6
Delay
9
Advertisement
Table of Contents
