Toshiba RAV-GM901CTP Series Service Manual page 89

No. Part name
Drain pan
10
1. Detachment
1) Perform works of 1 of
2) Remove the drain cap and then extract
the drain water accumulated in the
drain pan.
NOTE
When removing the drain cap, be sure to
receive drain water using a bucket, etc.
3) The drain hose is removed from the drain
pan joint while picking up the hose band.
4) The heat insulator stuck on air discharge
side of the drain pan is peeled off and an
inside shoulder screw is removed
90 type : (2 pcs.)
5) When installing, the heat insulator peeled
off is used.
6) Slide to the air discharge side, remove
the drain pan.
2. Attachment
1) The drain cap is surely inserted up to
the drain pan root.
2) Slide to the air discharge side, hooking
surely the frame on fan side.
3) Attach the shoulder screws as original
position, the heat insulator is stuck on.
4) The hose band is used and the drain
hose is installed.
Procedure
9.
- 89 -
Remarks
Drain cap
Heat insulator
Shoulder screw