Toshiba RAV-GM901CTP Series Service Manual page 83

No. Part name
⑤ Fan,
Quantity of fan
Fan case,
Shaft
1. Detachment
It explains the following content by
90 type.
1) Perform works of 1 of ① and ②.
2) Remove the support plate.
(Ø4 x 10, 1 pcs.) (90 type only) The
screw on a front side is removed, and it
detaches it from the square hole on the
back side.
3) Remove the fixing screws of
the fan case (under).
(Ø4 x 10, 1 pcs.)
4) The hanging claw on both sides of fan
case (under) is removed.
5) Fan case (under) is pulled out from the
partition plate, and fan case (under) is
removed.
6) The screw with the hexagonal screw
hole to of the coupling is loosened, and
the shaft is removed with the fan.
7) The screw with the hexagonal screw
hole of the fan is loosened, and the fan
is detached from the shaft.
Procedure
Model
QTY
90
4
NOTE
Support plate
Front side screw
Coupling
- 83 -
Remarks
Square hole
Hanging claw
Shaft and Fan