10.3. Saw Head; Remove Covers; Remove Handle/Blade Guard Mount - Husqvarna WS442HF Workshop Manual

10.3
1
3
5
1
3
98
REPAIR INSTRUCTIONS
2
4
WS482 and
6
WS442
2

10.3. SAW HEAD

Remove Covers

First see:
(p. 77)
1� Open the cover by flipping the
two hinges�
2� Remove the hinges by gently
bending them of the frame�
3� Remove the 2 screws that is
attached to the housing�
4� Lift the orange cover off�
5� Disconnect the hoses by pulling
the water nipples back and pull
WS482 and
the hose out�
WS442
6� Remove the water cooling
attachment�
Remove Handle/Blade
Guard Mount
First see:
98)
1� Remove the four screws holding
the handle to the motor�
2� Remove the two screws holding
the handle to the housing�
3� Lift the handle away�
Detach Arm/Housing
Remove Covers (p.