Table of Contents
Advertisement
6 Cleaning and maintenance
6.4 Cleaning and installation of the side brush
In the long term use, wash the side brush with warm water in order to eliminate the shape deformation.
Install it to the robot as it is shown after it has dried.
6.5 Cleaning of the sensors
Clean the sensors and charging pins/electrodes regularly and remove the dust using a dry and soft cloth
or a cleaning brush.
Information: You get a notification via the application when sensor cleaning is required.
Charging
Șarj
pins
pinleri
Front bumper
Ön tampon
hitting sensor
çarpma sensörü
Robot Vacuum / User Manual
Charging
Wheel shaft
Tekerlek mili
communica-
Șarj iletișim
tion pins
pinleri
Bumper sensor
Tampon sensörü
25 / EN
Advertisement
Table of Contents
