Table of Contents
Advertisement
5 Operation
5.4.1 Installation of the wet mopping unit
Remove the dust container and the
water tank assembly (2 in 1).
Remove the swab on the mop
retainer as it is shown.
Install the mop retainer to the
dust container and the water
tank assembly (two in one) in
the direction of the arrow.
20 / EN
Remove the dust container.
Moisten the swab before each
mopping.
Install the dust container and
the water tank assembly (two
in one) to the appliance, their
places in the direction of the
arrow.
Remove the rubber plug and
add water to the water tank
from the water inlet.
Place the swab to the mop retainer.
Robot Vacuum / User Manual
Advertisement
Table of Contents
