Table of Contents
Advertisement
Malfunction
Spin result is
not to satisfaction-
ness. The laundry is
too wet / too damp.
Detergent residue on
the damp laundry.
Detergent residue on
the dry laundry.
Cause and Troubleshooting
Start the programCentrifuge.
▶
Unbalance control system compensates for
imbalance through reduced spin speed.
Redistribute the laundry in the drum.
▶
Remark:If possible, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
Start the programCentrifuge.
▶
Detergents may contain water-insoluble substances,
which deposit on the laundry.
Start the programTo rinse.
▶
Unsuitable detergent has been placed in the dosing
container of the intelligent dosing system.
Check whether the detergent used is suitable.
1.
→ †Detergent and care agent", Page 32
Empty the dosing containers.
2.
→ †Cleaning the detergent drawer", Page
37
Clean the dosing containers.
3.
Refill the dosing containers.
4.
→
†Filling the dosing container", page 35
Basic dosing amount not set correctly.
When the intelligent dosing is activated, reduce the
▶
basic dosing amount
→ Page 36 †
Detergents may contain water-insoluble substances,
which deposit on the laundry.
Brush the laundry after washing and drying.
▶
Unsuitable detergent has been placed in the dosing
container of the intelligent dosing system.
Check whether the detergent used is suitable.
1.
→ †Detergent and care agent", Page 32
Empty the dosing containers.
2.
→ †Cleaning the detergent drawer", Page
37
Clean the dosing containers.
3.
Refill the dosing containers.
4.
→
†Filling the dosing container", page 35
TroubleshootingNL
51
Advertisement
Table of Contents
