Removing Transport Reinforcements - Siemens WG56G2A3FG User Manual And Installation Instructions

Loosen and remove all bolts of the 4
2.
transport locks with a SW13 open-
end wrench
†
Remove the mains connection cable from
3.
the holder.
Remove the 4 sleeves.
4.
Set up and connectNL
Install the 4 cover caps.
5.
Push the 4 cover caps down.
6.
4.5 Removing transport
reinforcements
Loosen and remove the screws of
1.
the vertical transport
reinforcements with a T20
screwdriver.
15