NLTroubleshooting
Malfunction
burns.
flashes.
44
Cause and Troubleshooting
Water pressure is low.
No solution possible.
The strainers in the water supply are clogged.
▶ Clean the strainers in the water supply.
Water tap is closed.
Open the water tap.
▶
Water supply hose is kinked or pinched.
Make sure that the water supply hose is not
▶
kinked or pinched.
Water level measuring system defective.
Please contact customer service.
▶
→
†Customer Service", page 55
The detergent drawer is not closed as far as it will go.
▶ Push the detergent drawer into the appliance as far as it
will go.
Pump unit is not installed.
Place the pump unit in the detergent drawer.
1.
→ †Cleaning the detergent drawer", Page
37
Push the detergent drawer into the appliance as far as it
2.
will go.
Temperature is too high.
Wait for the temperature to drop.
▶
→ †program cancel", page 34
▶
Water level is too high.
Select a suitable program for draining.
▶
→ †Programs", Page 27
Door is not closed.
Close the door.
1.
To start the program, pressStart/Pause.
2.
Laundry is wedged in the door.
Open the door again.
1.
Remove trapped laundry.
2.
Close the door.
3.
To start the program, pressStart/Pause.
4.