One-Touch Connection (Nfc); Unable To Connect The Headset To A Bluetooth Device With One-Touch Connection (Nfc) - Sony MDR-XB50BS Help Manual

Help Guide
Wireless Stereo Headset
MDR-XB50BS
Unable to connect the headset to a BLUETOOTH device with one-touch
connection (NFC)
Keep the smartphone close to the headset until the smartphone reacts. If you fail to connect, move the smartphone slowly on
the N-Mark of the headset.
Check that the NFC function of the smartphone is set to on.
If the smartphone is in a case, remove it.
NFC reception sensitivity varies depending on the device. If you repeatedly fail to connect the headset with a smartphone by
one touch, connect it to the headset by on-screen operation on the smartphone.
You cannot make a one-touch connection (NFC) while charging the battery because the headset cannot be turned on. Finish
charging first, and then make the one-touch connection (NFC).
You are using a smartphone with Android 2.3.3 up to Android 4.0.4, but has not installed the one-touch connection app "NFC
Easy Connect."
Related Topic
One-touch connection (NFC) with a smartphone (Android 4.1 or later)
One-touch connection (NFC) with a smartphone (Android 2.3.3 or later, and less than Android 4.1)
4-595-529-11(1) Copyright 2016 Sony Corporation
98