en Safety 1 Safety Observe the following safety instructions. 1.1 General information Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe ¡ for future reference or for the next owner. Do not connect the appliance if it has been damaged in transit. ¡...
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. Connect and operate the appliance only in accordance with the ▶ specifications on the rating plate. Connect the appliance to a power supply with alternating cur- ▶ rent only via a properly installed socket with earthing. The protective conductor system of the domestic electrical in- ▶...
Page 6
en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. Do not lift the appliance on your own. ▶ If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. Only stack the dryer on a washing machine using the connec- ▶...
Safety en Wear protective gloves when installing and transporting the ap- ▶ pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always ▶...
Page 8
en Safety WARNING ‒ Risk of poisoning! Detergents and care products may result in poisoning if con- sumed. If accidentally swallowed, seek medical advice. ▶ Keep detergents and care products out of the reach of children. ▶ WARNING ‒ Risk of explosion! Laundry that has been pretreated with cleaning agents that con- tain solvents may cause an explosion in the appliance.
Safety en 1.6 Safe cleaning and maintenance WARNING ‒ Risk of electric shock! Improper repairs are dangerous. Never make any technical modifications to the appliance or its ▶ features. Repairs to the appliance should only be carried out by trained ▶ specialist staff. Only use genuine spare parts when repairing the appliance. ▶...
en Preventing material damage If the water pressure is too high or Preventing material damage 2 Preventing material too low, the appliance may not be able to operate properly. damage Ensure that the water pressure in ▶ the water supply system is at least Preventing material damage ATTENTION! 100 kPa (1 bar) and max.
Environmental protection and saving energy en Set the maximum spin speed if you Environmental protection and saving energy 3 Environmental protec- want to dry the laundry in the tumble tion and saving energy dryer afterwards. a The drier the laundry, the shorter Environmental protection and saving energy the programme duration when dry- 3.1 Disposing of packaging...
en Installation and connection Remove any packaging and pro- Water inlet hose ¡ tective covers completely from the → "Connecting the water inlet appliance. hose", Page 14 → "Disposing of packaging", 4.3 Requirements for the in- Page 11 stallation location Check the appliance for visible damage. Open the door.
Installation and connection en Unscrew and remove all of Installation loca- Requirements the screws for the 4 transit bolts tion using a WAF 13 wrench. Kitchen unit Only install the appliance under- neath a continu- ous worktop that is securely con- nected to adja- cent cabinets.
en Installation and connection Put on the 4 cover caps. Connect the water inlet hose to a tap (26.4 mm = 3/4"). Push the 4 cover caps downwards. Open the water tap carefully and check that the connection points are tight. Water outlet connection types This information is intended to help you to connect this appliance to the water outlet.
Installation and connection en 4.6 Aligning the appliance Plastic pipe with Fix and secure rubber sleeve or the water outlet In order to reduce noise and vibra- gully hose with an el- tion and to prevent the appliance bow. from moving, align the appliance cor- → "Accessories", rectly.
Page 16
en Installation and connection Use a WAF 17 wrench to tighten the lock nuts against the housing until they are hand-tight. In doing so, hold the foot tight and do not adjust its height.
Familiarising yourself with your appliance en Familiarising yourself with your appliance 5 Familiarising yourself with your appliance Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured.
en Familiarising yourself with your appliance Measuring aid for liquid deter- gent → "Inserting the measuring aid for liquid detergent", Page 30 Dispenser II: detergent for the main wash Compartment : Fabric softener Compartment I: Detergent for prewash and soaking 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status.
Before using for the first time en Add washing powder containing Before using for the first time 6 Before using for the oxygen bleach to compartment II. first time Prepare the appliance for use. Before using for the first time 6.1 Starting an empty wash- ing cycle Your appliance was inspected thor- oughly before leaving the factory.
Page 20
en Display Display 7 Display The display shows the current settings, options or relevant information. Display Example: Display Display Description 0:40 Expected programme duration or programme time re- maining in hours and minutes. Program end time → "Buttons", Page 23 Recommendation for the maximum load capacity for the selected program in kg.
Page 21
Display en Display Description Wash Programme status Rinse Programme status Spin Programme status Program end Programme status Steaming Programme status Lights up: The childproof lock is activated. ¡ Flashes: The childproof lock is activated and the appli- ¡ ance has been operated. → "Deactivating the childproof lock", Page 33 The crease-reduction function is activated.
Page 22
en Display Display Description The stain type is activated. Flashes: Drum cleaning is required. Run the Drum clean programme for cleaning and caring for the drum and the outer tub. → "Cleaning the drum", Page 35 Flashes: The voltage control system has paused the pro- gramme due to impermissible voltage drops.
Page 23
Buttons en Buttons 8 Buttons The selection of programme settings depends on the programme that is set. Buttons Button Selection More information (Start/Reload) Start Start, cancel or pause the pro- ¡ gramme. Cancel ¡ Pause ¡ Quick Activate Activate or deactivate a shorter pro- ¡...
en Buttons Button Selection More information Pretreatment (Prewash) Selecting activates the Prewash ¡ programme. (Soaking) ¡ Prewash for washing heavily soiled laundry. Selecting activates the Soaking programme. Before the main wash cycle starts, the laundry remains in the water for longer. For laundry with particularly stubborn soiling.
Page 25
Programmes en Programmes 9 Programmes Programmes Note: The laundry's care labels provide you with additional information on pro- gramme selection. Programme Description Max. load (kg) Cotton Wash hard-wearing items made of cotton, linen or blended fabrics. Also suitable as a short programme for normally soiled laundry when you activate Quick.
Page 26
en Programmes Programme Description Max. load (kg) Programme setting: Max. 60 °C ¡ Max. 1400 rpm ¡ Delicates Wash delicate, washable items made from silk, vis- cose and synthetic fabrics. Use a detergent that is suitable for delicates or silk. Note: Wash especially delicate items or items with hooks, eyelets or clips in a mesh laundry bag.
Page 27
Programmes en Programme Description Max. load (kg) Shirts Wash non-iron shirts and blouses made from cot- ton, linen, or synthetic or blended fabrics. Tip: In order to avoid creasing in your laundry, you can activate Easy iron. The laundry is only given a short spin and can be removed while still dripping wet.
Page 28
en Programmes Programme Description Max. load (kg) Drum clean Clean and care for the drum. – Use this programme in the following cases: Before using the appliance for the first time ¡ If you regularly wash at temperatures of 40 °C or ¡...
Accessories en Accessories 10 Accessories Use original accessories. These have Accessories been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 50. Order num- Elbow Secure the water outlet hose in place. 0065300 Liquid detergent in- Measure liquid detergent.
en Detergents and care products If required, adjust the programme Detergents and care products 12 Detergents and care settings. → "Adjusting the programme set- products tings", Page 30 The manufacturer's instructions for Detergents and care products use and dosage can be found on the 13.3 Adjusting the pro- packaging.
Basic operation en Press down on the insert and re- Slide the measuring aid forwards. move the detergent drawer. Fold the measuring aid down and Insert the measuring aid. click it into place. Insert the detergent drawer. Push in the detergent drawer. 13.6 Use the measuring aid 13.7 Adding detergent and for liquid detergent...
en Basic operation – If the water level is high, start 13.8 Starting the programme the Spin programme or select a Requirement: A programme is set. suitable programme for draining. → "Setting a programme", Page 30 → "Programmes", Page 25 Remove the laundry. Press ▶ → "Unloading the laundry", The drum rotates and load detec- Page 32 tion takes place.
Childproof lock en Childproof lock 14 Childproof lock Secure your appliance against being Childproof lock operated unintentionally using the controls. 14.1 Activating the childproof lock Press and hold the two 3 sec. ▶ buttons for approx. 3 seconds. The display shows The control elements are locked. The childproof lock remains active even after the appliance has been switched off and in the event of a...
en Basic settings Basic settings 15 Basic settings You can configure the basic settings for your appliance to meet your needs. Basic settings 15.1 Overview of the basic settings Basic setting Programme Value Description position End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme.
Programme counter en 15.2 Changing the basic set- Cleaning and servicing 17 Cleaning and servi- tings cing Set the programme selector to po- To keep your appliance working effi- sition 1. Cleaning and servicing ciently for a long time, it is important to clean and maintain it carefully. 17.1 Cleaning the drum CAUTION Risk of injury!
en Cleaning and servicing Press down on the insert and re- Fit the insert and click it into place. move the detergent drawer. Clean the opening for the deter- Pull out the insert upwards. gent drawer. Clean the detergent drawer and in- Push in the detergent drawer.
Page 37
Cleaning and servicing en Open and remove the mainten- CAUTION - Risk of scalding! ance flap. When you wash at high temperat- ures, the detergent solution gets hot. Do not touch the hot detergent ▶ solution. To allow the detergent solution to flow out into the container, remove the sealing cap.
Page 38
en Cleaning and servicing Insert the pump cap. Cleaning the drain pump Ensure that the parts of the Requirement: The drain pump is ‒ pump cap are correctly as- empty. → Page 36 sembled. Since water may remain in the drain pump, unscrew the pump cap carefully.
Page 39
Cleaning and servicing en Before the next wash To prevent unused detergent from flowing straight into the outlet in the next wash, run a suitable programme for draining after you have emptied the drain pump. Open the water tap. Insert the mains plug. Switch on the appliance.
en Troubleshooting Troubleshooting 18 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶...
Page 41
Troubleshooting en Fault Cause and troubleshooting "E:30 / -80" Immediate measure: Mix one tablespoon of fabric ▶ softener with 0.5 litres of water and pour the mix- ture into compartment II (not for outdoor clothing, sportswear or items stuffed with down). Reduce the amount of detergent for the next wash- ▶...
Page 42
en Troubleshooting Fault Cause and troubleshooting lights up. The temperature is too high. Wait until the temperature has dropped. ▶ Cancel the programme. ▶ → "Cancelling the programme", Page 32 Water level is too high. Select a suitable programme for draining. ▶ → "Programmes", Page 25 flashes.
Page 43
Troubleshooting en Fault Cause and troubleshooting The programme does has not been pressed. not start. Press ▶ Door is not closed. Close the door. ▶ Childproof lock is activated. Deactivate childproof lock. ▶ → "Deactivating the childproof lock", Page 33 Ready in is activated. Check whether Ready in is activated.
Page 44
en Troubleshooting Fault Cause and troubleshooting The water is not drain- Reduce the amount of detergent for the next wash- ▶ ing. ing cycle with the same load. Unapproved extension installed on the water drain hose. Remove any unapproved extensions from the water ▶...
Page 45
Troubleshooting en Fault Cause and troubleshooting No water is visible in Water is below the visible area. the drum. Not a fault – no action required. ▶ Do not add any extra water to the appliance while it ▶ is operating. Drum jerks after the This is caused by an internal motor test.
Page 46
en Troubleshooting Fault Cause and troubleshooting The spin programme Drain pipe or water outlet hose is blocked. does not start. Clean the drain pipe and the water outlet hose. ▶ Drain pipe or water drain hose is caught or jammed. Ensure that the drain pipe and water drain hose are ▶...
Page 47
Troubleshooting en Fault Cause and troubleshooting Detergent or fabric Too much detergent/fabric softener in the detergent softener drips off the drawer. seal and collects on When dosing liquid detergent and fabric softener, ▶ the door or in the seal observe the marking in the detergent drawer and fold.
Page 48
en Troubleshooting Fault Cause and troubleshooting Water is leaking out at Water inlet hose is not correctly/securely connected. the water inlet hose. Connect the water supply hose correctly. → "Connecting the water inlet hose", Page 14 Tighten the screw connection. Water is leaking out at The water outlet hose is damaged.
Transportation, storage and disposal en 18.1 Emergency release 19.2 Inserting the transit bolts Releasing the door Secure the appliance before trans- Requirement: The drain pump is portation using transit bolts in order empty. → Page 36 to prevent transport damage. ATTENTION! Escaping water may Use a screwdriver to remove the 4 cause material damage.
en Customer Service 19.4 Disposing of old appli- Customer Service 20 Customer Service ance Function-relevant genuine spare parts Customer Service Valuable raw materials can be re- according to the corresponding Eco- used by recycling. design Order can be obtained from Customer Service for a period of at WARNING least 10 years from the date on Risk of harm to health!
Consumption values en Consumption values 21 Consumption values The following information is provided in accordance with the EU Ecodesign Consumption values Regulation. The values given for programs other than the Eco 40-60 are in- dicative only and were determined in accordance with the applicable standard EN60456.
Page 52
en Technical data Mains voltage 220-240 V, 50 Hz Minimum in- 10 A stallation protec- tion Nominal power 2300 W Power consump- Off mode: ¡ tion 0.15 W Left-on mode: ¡ 0.50 W Water pressure Minimum: ¡ 100 kPa (1 bar) Maximum: ¡ 1000 kPa (10 bar) Length of the wa- 150 cm ter inlet hose Length of the wa-...
Page 56
LORD Hausgeräte GmbH Nymphenburger Straße 4 80335 München DEUTSCHLAND *9001900997* www.lord.eu info@lord.eu 9001900997 (031024)